Value Creation · 9 min read · Updated November 2026

Buy-and-Build in Private Equity: How to Model a Platform and Its Add-Ons

How buy-and-build works in private equity and how to model it: platform vs add-on, multiple arbitrage, funding, integration costs and what the evidence shows.

On this page 7 sections

In a buy-and-build, a sponsor buys a platform and uses it to acquire and combine other businesses. The model has to separate organic growth from acquired earnings, fund each purchase and show what the combined business is worth at exit. A higher exit multiple is one possible outcome.

On a simplified teaching schedule of the house case (assumptions below), two add-ons bought at 4.5x and 5.0x lift exit EBITDA from $38.3 million to $45.3 million, yet at the same 6.0x exit they nudge the IRR up only from 25.1% to 25.5% and pull the MOIC down from 3.06x to 2.98x. Assume the larger company sells for 7.0x and the IRR reaches 29.5%, but most of that gain comes from the multiple, not the add-ons.

Platform vs Add-On: How Buy-and-Build Works

The platform needs management and systems that can absorb another business. A distributor buying a local competitor may gain warehouse capacity, suppliers and customers. Before modeling the acquisition, identify which branches and accounts will transfer, whether their contracts survive a sale and who will run the enlarged operation.

Platform Add-on
Role The base the strategy builds on A company folded into the platform
Size Larger, with full management and systems Smaller, often founder-owned
Purchase multiple Reflects the platform’s economics and the bid Can be lower or higher depending on growth, concentration, competition and terms
Funding Full LBO financing at close Delayed-draw term loan, cash on hand or new sponsor equity
Main risk Paying too much for the base Integration: people, systems, customers

The founder’s side of the trade shows why the model works. Scott Hanson describes selling a majority of his own firm to private equity to become a platform company, when it had about forty-five employees, for three reasons: better marketing, growth through acquisitions and access to capital on favorable terms. His example of the strategy is a sponsor buying a small insurance agency to build it into a national business (The Private Equity Advantage, 2026, ch. 1).

The Arithmetic: Multiple Arbitrage and Its Costs

If the buyer can acquire earnings below the multiple realized on those same earnings at exit, there is a potential pricing gain. In the value creation bridge, show the acquisition price alongside acquired EBITDA. The same spread cannot be added again after already valuing those earnings at the exit multiple.

Add-on EBITDA Purchase multiple Price Value at a 6.0x exit Arbitrage
Add-on A (start of year 2) $3.0M 4.5x $13.5M $18.0M $4.5M
Add-on B (start of year 3) $4.0M 5.0x $20.0M $24.0M $4.0M
Total $7.0M 4.8x $33.5M $42.0M $8.5M
Less integration costs ($2.0M)
Net arbitrage, if the EBITDA holds $6.5M

The $6.5 million assumes the acquired earnings hold, the combined business sells at 6.0x and the $2 million covers integration. Write a separate retention case: at 6.0x, losing $1 million of recurring EBITDA cuts exit enterprise value by $6 million and also reduces cash available for debt service during the hold.

House case EBITDA: organic and acquiredStacked columns of EBITDA from close to year 5. Organic EBITDA grows from $25.0 million to $38.3 million. Acquired EBITDA adds $3.0 million from year 2 and $7.0 million from year 3, for a total of $45.3 million in year 5 (highlighted).House case EBITDA: organic and acquiredOrganic EBITDAAcquired EBITDA$0M$10M$20M$30M$40M$50M$25.0MClose$29.0MY1$34.0MY2$40.2MY3$42.6MY4$45.3MY5House case base plan plus two add-ons: $3.0M of EBITDA bought at the start of year 2 and$4.0M at the start of year 3. No synergies assumed.
From the testRedwick Technical Services · The assignment

a simple capital structure: one unitranche loan at the leverage multiple you recommend;

sensitivity tables on returns and on the key assumptions, for both a management case and a base case.

The memorandum describes a sponsor-owned technical building services company that grows by acquisition.

Do Add-On Acquisitions Create Value?

Hammer, Hinrichs and Schweizer compared 788 European PE-backed businesses with 6,652 matched peers and followed acquisitions from 1997 through 2015. Their separate performance analysis covered 278 buyouts.

Finding Detail
Private equity owners speed acquisitions up Backing raises the expected number of acquisitions by 84% to 99%, but the boost fades within about four years
They do not change what is bought The type and complexity of acquisitions look like those of non-backed peers
Add-ons help on average In 278 buyouts, each add-on is associated with 3.5% faster annual growth in enterprise value, an EV/EBITDA multiple 15.7% higher and an operating margin 1.6% better
Timing matters In late-fund investments, the estimated benefit was weaker or reversed. The authors suggest that pressure to exit can shorten the time available to integrate.

The authors’ explanation is learning: the company benefits from its owner’s acquisition experience, and that takes time and attention. A fund that spreads its staff too thinly leaves managers to integrate a string of add-ons alone. Deal count is not a value creation plan.

How to Model a Platform and Its Add-Ons

Building add-ons into an LBO model
  1. Build the platform LBO firstSources and uses, operating case, debt schedule and returns, exactly as for a standalone deal.
  2. Set each add-on's termsClosing date, EBITDA, purchase multiple, funding split, integration cost and any synergies with a realistic lag.
  3. Consolidate from the closing dateAdd revenue, EBITDA and working capital only from the date each deal closes.
  4. Fund each dealDraw the delayed-draw term loan or use cash; put any new sponsor equity in the IRR as a separate dated cash flow.
  5. Report organic and acquired growth apartInvestment committees ask how much of the growth was bought.
  6. Bridge the valueOrganic EBITDA growth, acquired EBITDA at cost, arbitrage, any multiple change and debt paydown.
  7. Stress the add-onsEarnings that fall after the sale, higher purchase multiples, later closings and a lower exit multiple.

A delayed-draw term loan lets the borrower draw committed funds later, within an availability window and subject to the credit agreement. Check permitted uses, conditions, fees and the date unused commitments expire before putting a draw in the acquisition schedule. Avago’s filing shows why the permitted use matters. It drew $250 million in January 2006 to retire preferred shares. A delayed draw alone tells you nothing about the acquisition pipeline. Avago SEC prospectus

Exhibit A

The house case with two add-ons

In the teaching schedule, Industrial Inc. costs $150 million. Opening debt and sponsor equity are $80 million each, funding the purchase plus $5 million of fees and $5 million of minimum cash. Add two acquisitions, funding each with debt of 3.0x its EBITDA and new sponsor equity for the rest of the price. Each also requires $1.0 million of integration spending from cash.

Scenario Exit EBITDA Total equity invested MOIC IRR
Platform only, 6.0x exit $38.3M $80.0M 3.06x 25.1%
Two add-ons at 4.5x and 5.0x, 6.0x exit $45.3M $92.5M 2.98x 25.5%
Same add-ons, earnings 25% lower after purchase $43.6M $92.5M 2.82x 24.0%
Add-ons bought at 6.0x instead $45.3M $101.0M 2.73x 23.7%
Two add-ons, 7.0x exit for the larger company $45.3M $92.5M 3.47x 29.5%
Platform only, 7.0x exit $38.3M $80.0M 3.54x 28.8%
  1. The add-ons add little at a 6.0x exit: 0.4 points of IRR, because the sponsor puts in $12.5 million more equity and the arbitrage, after integration costs, is modest.
  2. They subtract if they disappoint or cost too much. A 25% earnings drop or a purchase at the platform’s own multiple leaves the sponsor worse off than with no add-ons.
  3. The big number comes from the exit multiple. At 7.0x, the platform alone returns 28.8%; the add-ons add only 0.7 points on top. If the 7.0x depends on the larger scale the add-ons create, say so and defend it, because that is where the return really comes from.

Why does the IRR rise while the MOIC falls? The dates of the equity explain it:

Sponsor equity by year: platform only vs two add-onsTwo rows of sponsor cash flows. Platform only: $80 million invested at close and $245.0 million returned in year 5, 3.06x and 25.1%. Two add-ons: $80 million at close, $4.5 million at the end of year 1, $8.0 million at the end of year 2 and $275.7 million returned in year 5, 2.98x and 25.5% (highlighted).Sponsor equity by year: platform only vs two add-onsPlatform only($80)$2453.06x | 25.1%Two add-ons($80)($4.5)($8)$275.72.98x | 25.5%Y0Y1Y2Y3Y4Y5Teaching schedule. Values in $M. Add-on equity goes in at the start of years 2 and 3,shown at the end of years 1 and 2.

The extra $12.5 million of equity goes in one and two years after close and adds about $30.7 million of exit equity: roughly 2.5x on its own, below the platform’s 3.06x, so the blended multiple falls. But that money is invested for only three to four years, so its own IRR is about 30%, above the platform’s 25.1%, and the blended IRR rises. A lower multiple earned over a shorter time is the add-on trade in one line, and it is why a model has to put each equity check in the IRR on its own date.

House case IRR under buy-and-build scenarios

Horizontal bars of sponsor IRR: platform only 25.1%; two add-ons at a 6.0x exit 25.5% (highlighted); add-ons with earnings 25% lower 24.0%; add-ons bought at 6.0x 23.7%; two add-ons with a 7.0x exit 29.5%.

  • Add-ons, 6.0x exit25.5%
  • Add-ons earn 25% less24.0%
  • Add-ons bought at 6.0x23.7%
  • Add-ons, 7.0x exit29.5%

Platform only, 25.1%

Teaching schedule of the house case. Add-ons: $3.0M of EBITDA at 4.5x (year 2) and $4.0M at 5.0x (year 3).

How to Handle Add-Ons in a Case Study

When a memorandum describes a company that grows by acquisition, reviewers look for whether you understood how the acquisitions are paid for:

  1. Separate organic from acquired growth in the historical numbers and in the projections.
  2. Fund every acquisition explicitly: the debt it draws, the equity it needs, and the effect on leverage and covenants.
  3. Price add-ons below the platform only if the market supports it, and show the arbitrage after integration costs.
  4. Hold the exit multiple flat in the base case, and show the return at a higher multiple separately with the reason.
  5. Say what the pipeline depends on: a team that has done it before and enough years left in the hold to integrate.

Buy-and-build traps

TrapWhat goes wrongHow to catch itFix
Counting acquired EBITDA as growthRevenue and EBITDA growth look strong, but most of it was bought.Split each year's growth into organic and acquired.Report the two separately and judge the organic rate on its own.
Free add-onsAcquired EBITDA appears with no debt drawn and no equity added.Tie each acquisition's price to a source of funds.Draw the acquisition debt and add new equity as a dated cash flow in the IRR.
Synergies on day oneCost savings start in the month the add-on closes.Ask when integration will be finished and what it costs.Phase synergies in with a lag and charge integration costs.
The arbitrage hides in the exit multipleThe return depends on the combined company selling at a higher multiple.Rerun the returns at the entry multiple.Show arbitrage and re-rating separately and defend the re-rating.
A pipeline with no time to integrateSeveral add-ons close in the last two years of the hold.Compare closing dates with the planned exit.Leave time to integrate before exit, or exclude late deals from the base case.

Buy-and-build model checklist

  • Each add-on with a closing date, EBITDA, multiple, funding and integration cost.
  • Acquired results consolidated only from the closing date.
  • Acquisition debt drawn and new equity in the IRR as dated cash flows.
  • Organic and acquired growth reported separately.
  • Value bridge splitting organic growth, arbitrage, multiple change and debt paydown.
  • Sensitivities on add-on earnings, purchase multiple, timing and exit multiple.
  • Leverage and covenants tested after each acquisition.

Frequently Asked Questions

What is a buy-and-build strategy in private equity? A buy-and-build strategy buys a platform company and then uses it to acquire smaller add-on companies, usually in the same or a related market. The aim is a larger, more capable business that grows faster and sells for a higher multiple than the pieces were bought for.

What is the difference between a platform and an add-on acquisition? The platform is the first acquisition, bought as a standalone LBO with its own management, systems and financing. Add-ons are smaller companies the platform buys afterward and integrates into its operations, often funded by a delayed-draw term loan or additional equity, and may trade at a different multiple from the platform.

What is multiple arbitrage in a buy-and-build? Buying add-ons at a lower EBITDA multiple than the combined company is expected to sell for. If an add-on with $3 million of EBITDA is bought at 4.5x and the platform exits at 6.0x, that EBITDA is worth $4.5 million more at exit than it cost, before integration costs and assuming the earnings hold.

How do you model add-on acquisitions in an LBO? Give each add-on a closing date, EBITDA, purchase multiple, funding split and integration cost. Consolidate its earnings from the closing date, draw the acquisition debt and add any new sponsor equity as a separate dated cash flow in the IRR, and report organic and acquired growth separately.

Do add-on acquisitions create value? They can. Hammer, Hinrichs and Schweizer found higher valuations and margins associated with add-ons in a sample of 278 buyouts, with weaker outcomes for late-fund investments. For a particular deal, compare the incremental cash and exit proceeds with the purchase price, integration costs and financing.

Why is buy-and-build risky? The platform takes on acquisition and integration risk while servicing its existing debt. Stress customer losses, the departure of a founder, delayed systems integration and a lower exit multiple. Then check whether the combined company still has enough cash.

Sources

Research:

Books and data:

  • David Stowell and Paul Stowell, Investment Banks, Hedge Funds, and Private Equity, 4th ed. (Academic Press, 2024): ch. 20, p. 467 on add-on acquisitions; the Panera Bread case, p. 736, Exhibit 6 (PitchBook deal counts by type).
  • Cyril Demaria, Introduction to Private Equity, Debt and Real Assets, 3rd ed. (Wiley, 2020), section 4.1.3: the leveraged build-up.
  • Scott Hanson, The Private Equity Advantage (2026), ch. 1: selling to private equity to become a platform, a founder’s account.
  • Avago’s prospectus, “The Acquisition” and “Senior Credit Facilities,” gives the delayed draw’s amount, availability window and actual use.

Our calculations:

Revision History

  1. : Reconciled acquisition financing and the Avago delayed draw, and checked the study results.
  2. : Corrected the timeline label for the $4.5 million add-on equity investment.
  3. : First published, with two add-ons modeled on the house distribution case.